English
 |
| Quantity: | |
|---|---|
GDQT SF6 Gas Handling Machine
CHONGQING GOLD
8421299090
Efficient SF6 Gas Handling Machine for SF6 Gas Recovery and Purification
Introduction of SF6 Gas Handling machine:
Its core function is to safely, efficiently, and environmentally recover, purify, and store SF6 gas in equipment, and to fill the equipment with new or purified SF6 gas when needed, while ensuring the vacuum level throughout the entire process.
Key Features of SF6 Gas Handling machine:
1) Recycling: Extracting SF6 gas from electrical equipment (such as maintenance and retired equipment).
2) Purification/Regeneration: Treat the recovered SF6 gas to remove moisture, air, decomposition products (such as SO2, HF, SOF2, etc.), and particulate impurities, so that the gas meets the purity requirements of relevant standards.
3) Storage: Safely store the recovered and purified liquid SF6 in dedicated storage tanks and pressure vessels equipped with the device.
4) Filling: By precisely controlling the inflation pressure and rate, the stored purified gas or new SF6 gas is filled into the electrical equipment.
5) Vacuuming: Deep vacuuming of the piping system inside electrical equipment or devices before or after equipment inflation or recovery.
Model for Choice:
| Parameter | Unit | GDQT-2 | GDQT-10 | GDQT-15 | GDQT-30 | GDQT-60 |
Compressor recovery rate | m³/h | 2 | 10 | 15 | 30 | 60 |
Recovery pressure | MPa | initial pressure: 0.8MPa（20℃）; Final pressure≤1mbar | ||||
1m³ gas recovery time (initial pressure 0.6MPa) | h/m³ | ≤3 | ≤0.6 | ≤0.4 | ≤0.2 | ≤0.1 |
Filling pressure | initial pressure: 133Pa Final pressure: 0.8Mpa | |||||
1m³ gas injection time(initial pressure 133Pa to 0.6MPa) | h/m³ | ≤3 | ≤0.6 | ≤0.4 | ≤0.2 | ≤0.1 |
The time required for 1m³ volume vacuity from 0.1MPa to 133Pa | h | ≤1 | ≤0.6 | ≤0.4 | ≤0.4 | ≤0.4 |
Ultimate vacuum | Pa | ≤10 | ||||
Gasification way | Electric Heating | |||||
Liquefaction way | High pressure condensation liquefaction | |||||
Dry filter regeneration mode | Vacuum heating re-activated | |||||
Power supply | AC380V,50Hz,3-Phase 4-Wire (or as requested) | |||||
Total electrical power | KW | 5 | 8 | 12 | 18 | 22 |
Gas purity after recovery SF6 (50KGS) | Water content(ppm/V): 60 | |||||
Oil content (ppm/W): 5 | ||||||
Impurities(μm): 1 | ||||||
Storage tank (Optional) | Storage method: Liquid gas | |||||
| Mpa | Pressure: ≤5.0 | |||||
| L | Volume: 300 | |||||
| Kg | Liquid storage capacity: 280 | |||||
Why do we need to use SF6 Gas Handling Machine?
1. Environmental requirements: SF6 is an extremely strong greenhouse gas. The SF6 gas recovery device is a key equipment for reducing SF6 emissions into the atmosphere, which complies with international conventions and environmental regulations of various countries.
2. Economy: High purity SF6 gas is expensive. The use of SF6 gas recovery equipment for recycling, purification, and reuse can significantly reduce operating costs.
3. Equipment maintenance:
Routine maintenance/testing: SF6 gas must be recovered before the equipment needs to be opened for inspection or testing.
Fault handling: When there is an internal fault in the equipment, it needs to be repaired after recovering SF6 gas.
Equipment retirement: Thoroughly recover SF6 gas from the equipment.
Flow Chart of SF6 Gas Handling Machine
Projects
Our Partners
Contact Us
Contact Person: Christine Gou
Whatsapp/Wechat: +86 15123029885
Mobile: +86 15123029885
E-mail: gold05@hy-industry.com
Efficient SF6 Gas Handling Machine for SF6 Gas Recovery and Purification
Introduction of SF6 Gas Handling machine:
Its core function is to safely, efficiently, and environmentally recover, purify, and store SF6 gas in equipment, and to fill the equipment with new or purified SF6 gas when needed, while ensuring the vacuum level throughout the entire process.
Key Features of SF6 Gas Handling machine:
1) Recycling: Extracting SF6 gas from electrical equipment (such as maintenance and retired equipment).
2) Purification/Regeneration: Treat the recovered SF6 gas to remove moisture, air, decomposition products (such as SO2, HF, SOF2, etc.), and particulate impurities, so that the gas meets the purity requirements of relevant standards.
3) Storage: Safely store the recovered and purified liquid SF6 in dedicated storage tanks and pressure vessels equipped with the device.
4) Filling: By precisely controlling the inflation pressure and rate, the stored purified gas or new SF6 gas is filled into the electrical equipment.
5) Vacuuming: Deep vacuuming of the piping system inside electrical equipment or devices before or after equipment inflation or recovery.
Model for Choice:
| Parameter | Unit | GDQT-2 | GDQT-10 | GDQT-15 | GDQT-30 | GDQT-60 |
Compressor recovery rate | m³/h | 2 | 10 | 15 | 30 | 60 |
Recovery pressure | MPa | initial pressure: 0.8MPa（20℃）; Final pressure≤1mbar | ||||
1m³ gas recovery time (initial pressure 0.6MPa) | h/m³ | ≤3 | ≤0.6 | ≤0.4 | ≤0.2 | ≤0.1 |
Filling pressure | initial pressure: 133Pa Final pressure: 0.8Mpa | |||||
1m³ gas injection time(initial pressure 133Pa to 0.6MPa) | h/m³ | ≤3 | ≤0.6 | ≤0.4 | ≤0.2 | ≤0.1 |
The time required for 1m³ volume vacuity from 0.1MPa to 133Pa | h | ≤1 | ≤0.6 | ≤0.4 | ≤0.4 | ≤0.4 |
Ultimate vacuum | Pa | ≤10 | ||||
Gasification way | Electric Heating | |||||
Liquefaction way | High pressure condensation liquefaction | |||||
Dry filter regeneration mode | Vacuum heating re-activated | |||||
Power supply | AC380V,50Hz,3-Phase 4-Wire (or as requested) | |||||
Total electrical power | KW | 5 | 8 | 12 | 18 | 22 |
Gas purity after recovery SF6 (50KGS) | Water content(ppm/V): 60 | |||||
Oil content (ppm/W): 5 | ||||||
Impurities(μm): 1 | ||||||
Storage tank (Optional) | Storage method: Liquid gas | |||||
| Mpa | Pressure: ≤5.0 | |||||
| L | Volume: 300 | |||||
| Kg | Liquid storage capacity: 280 | |||||
Why do we need to use SF6 Gas Handling Machine?
1. Environmental requirements: SF6 is an extremely strong greenhouse gas. The SF6 gas recovery device is a key equipment for reducing SF6 emissions into the atmosphere, which complies with international conventions and environmental regulations of various countries.
2. Economy: High purity SF6 gas is expensive. The use of SF6 gas recovery equipment for recycling, purification, and reuse can significantly reduce operating costs.
3. Equipment maintenance:
Routine maintenance/testing: SF6 gas must be recovered before the equipment needs to be opened for inspection or testing.
Fault handling: When there is an internal fault in the equipment, it needs to be repaired after recovering SF6 gas.
Equipment retirement: Thoroughly recover SF6 gas from the equipment.
Flow Chart of SF6 Gas Handling Machine
Projects
Our Partners
Contact Us
Contact Person: Christine Gou
Whatsapp/Wechat: +86 15123029885
Mobile: +86 15123029885
E-mail: gold05@hy-industry.com
