0.02% Accuracy Current Transformer CT Analyzer CT PT Testing Equipment
Product Description
0.02% Accuracy Current Transformer CT Analyzer Ct Pt Testing Equipment
General introduction
| | This product is specifically designed for on-site testing of current transformers and voltage transformers, supporting various testing items such as excitation curve, turn ratio, polarity, winding resistance, etc. The device is equipped with a low-frequency excitation testing principle, which can complete high saturation voltage CT testing at low voltage and is suitable for use in on-site environments such as substations. |
Product advantages
Automatic range switching function, current measurement range 0~10A, voltage measurement range 0~200V, reducing manual intervention.
Supports multiple international standards such as IEC60044 and C57.13 to meet the testing requirements of different countries and regions.
One click start of the testing process, automatically completing demagnetization, boosting, and data acquisition, with a maximum testing cycle of about 30 minutes.
The test results can save over 1000 sets and support exporting Word reports from a USB drive, making it convenient for on-site recording and subsequent analysis.
Main menu interface | virtual keyboard |
Scale parameters
| |
Function | CT, PT |
Test standard | IEC60044-1/2/5/6,IEC61869, C57.13 |
Voltage output | 0.1~180V(AC) |
Current output | 0.001~5A(RMS) |
Power output | 300VA |
Current measurement | 0~10A |
Voltage measurement | 0~200V |
Turn ratio measurement | 1~30000 |
Dimension | 485*356*183mm |
Weight | 15KG |
Tests for current transformer | Excitation curve and parameters test; Turns ratio test; Ratio and phase error test; Polarity mark check; Coil resistance measurement; Secondary loop burden measurement; Error line curve test for protection CT; Transient CT parameters test; CT nameplate guess; Saturation hysteresis loop curve measurement
|
Tests for voltage transformer | Turns ratio test; Polarity test; Secondary burden test; Coil resistance test; Phase angle error test |
Applications for CTPT analyzer | CT nameplate check; CT parameters check in work burden; CT transient parameters analysis; CT ratio and phase error calibration; PT routine test |
Application Functionality
CT turn ratio error and phase error testing
PT secondary circuit load measurement
Transient CT parameter analysis (such as Kssc, Ktd, Ts)
Packing List
1 main unit
4 test cables
1 grounding wire
2 test clamps
1 power cord
1 USB flash drive
| | |
Contact Us
Contact Person: Christine Gou
Whatsapp/Wechat: +86 15123029885
Mobile: +86 15123029885
E-mail: gold05@hy-industry.com